SACH Foot with Titanium PyramidPrint
Expanding on the benefits of the traditional SACH foot, this low activity model is created with a titanium pyramid already attached. Since no bolt is needed, this model weighs less than traditional SACH feet with a separate pyramid attachment. Available in a unisex, lifelike, water-resistant cosmesis, the SACH Foot with Titanium Pyramid offers a lightweight composite heel, flexible toe belting with three toe resistances, two heel heights, and interchangeable heel inserts. All three heel inserts are included with each foot.
- Low Activity (U.S. Levels 1 & 2)
- Molded-in Titanium Pyramid Makes Foot Lightweight and Inexpensive
- New Lifelike Unisex Cosmesis
- Available in Three Toe Resistances and Two Heel Heights
|Weight||SACH Foot with Titanium Pyramid: 490 g (1.08 lb)*|
|Patient Weight Limit||250 lbs (115 kg)**|
|Heel Height||3/4” (18 mm)
3/8” (10 mm)
|Available Sizes||22 to 31 cm|
|Toe Resistance||Low, Regular, High|
|Heel Insert Densities||Soft, Medium, Firm (All three are included with each foot)|
||SACH Foot with Titanium Pyramid: 8.83 cm for 3/8″ heel, 8.10 cm for 3/4″ heel
Build height taken to top surface of SACH Foot.
|Cosmesis||Unisex, Lifelike in Buff, Tan or Medium Brown|
|U.S. Warranty||12 months from date of patient fitting
* Based on size 26 cm foot.
** Body weight plus any loads normally or routinely carried cannot exceed this weight limit.
*** Build height measurements taken for a size 26 cm foot with WillowWood components. Measurements will vary if using non-WillowWood components.
To order a SACH Foot, please select the size, side, color, toe resistance, and heel height. All three heel inserts are included with every foot.
|SFP-22RB-3M||SACH Foot SAMPLE Part Number|
|Name Code||SFP||SFP = SACH Foot with Titanium Pyramid|
|Size of Foot||22||22 to 31 cm|
|Side of Foot||R||L = Left
R = Right
|Color||B||B = Buff
M = Medium Brown
T = Tan
|Toe Resistance||3||2 = Low Toe Resistance
3 = Medium Toe Resistance
4 = High Toe Resistance
|Heel Height||M||L = Low 10 mm (3/8″)
M = Medium 18 mm (3/4″)
|Fasteners & Torque
|M10 x 38 mm Socket Head Capscrew||30 ft-lbs/41 Nm|
|English thread for use with all feet|
|3/8″ x 2.75″ Socket Head Capscrew||30 ft-lbs/41 Nm|
|700-HEEL-D||Heel Insert; Fits sizes 22-26 cm with 18 mm (3/4″) heel|
|700-HEEL-W||Heel Insert; Fits sizes 27-31 cm with 18 mm (3/4″) heel|
|700-HEEL-E||Heel Insert; Fits sizes 22-26 cm with 10 mm (3/8″) heel|
|700-HEEL-X||Heel Insert; Fits sizes 27-31 cm with 10 mm (3/8″) heel|
Ordering, assembling and aligning our SACH foot with Pyramid is covered in this instructional video.