Single Axis Foot
PrintConstructed of strong, lightweight composites and an advanced design, WillowWood offers the most progressive Single Axis Foot available. Ten to twenty percent lighter than conventional Single Axis Feet, this low activity model features a unisex, lifelike, water-resistant cosmesis and interchangeable anterior and posterior bumpers in three durometers. Available with a molded-in titanium pyramid. It features a lifelike cosmesis and interchangeable anterior and posterior bumpers in three durometers.
Product Highlights:
- Low Activity (U.S. Levels 1 & 2)
- Interchangeable Anterior and Posterior Bumpers
- Lightweight and Inexpensive
- Molded-in Titanium Pyramid
- Single Axis Foot Assembly Ships
Pre-assembled
| Weight | Endoskeletal Version: Foot only: 451 g (.99 lb)* Assembly: 571 g (1.27 lb)** |
| Patient Weight Limit | 250 lb (115 kg)*** |
| Heel Height | 3/4” (18 mm) 3/8” (10 mm) |
| Available Sizes | 22 to 31 cm |
| Toe Resistance | Low, Regular, High |
| Build Height**** |
8.13 cm for 3/8″ heel with Endoskeletal Single-Axis Ankle installed 7.36 cm for 3/4″ heel with Endoskeletal Single-Axis Ankle installed |
| Cosmesis | Unisex, Lifelike in Buff, Tan or Medium Brown |
| U.S. Warranty | 12 months from invoice date |
| U.S. L-Code Suggestion | L5974 |
* Based on size 26 cm foot.
**Based on size 26 cm foot, ankle, pin, bumpers.
*** Body weight plus any loads normally or routinely carried cannot exceed this weight limit.
**** Build height measurements taken for a size 26 cm foot with WillowWood components. Measurements will vary if using non-WillowWood components.
To order a complete Single Axis Foot Assembly, please select the size and side of the foot, color, toe resistance, heel height, the durometer of the anterior deflection bumper, and the durometer of the posterior deflection bumper. The Single Axis Foot Assembly will ship pre-assembled.
The Single Axis Foot may also be purchased individually without the ankle or bumpers. If ordering the foot only, please provide the size, side, color, toe resistance and heel height only. *Bumper information is not required when only ordering the Single Axis Foot.
| SAA-26LB-2L-MM | Single Axis Foot SAMPLE Part Number |
|
| Name Code | SAA | SAA = Single Axis Foot Assembly SAF = Endoskeletal Single Axis Foot |
| Size of Foot | 26 | 22 to 31 cm |
| Side of Foot | L | L = Left R = Right |
| Color | B | B = Buff M = Medium Brown T = Tan |
| Toe Resistance | 2 | 2 = Low 3 = Regular 4 = High |
| Heel Height | L | L = Low 10 mm (3/8″) M = Medium 18 mm (3/4″) |
| Anterior Bumper* | M | S = Soft (Blue) M = Medium (Black) F = Firm (White) |
| Posterior Bumper* |
M | S = Soft (Yellow) M = Medium (Green) F = Firm (Red) |
Single Axis Foot Instructions
Single Axis Endoskeletal Ankle Instructions
| Fasteners & Torque |
|
| M5 x 10 Capscrew | 5 ft-lbs/7 Nm |
Related products:
| Single Axis Bumpers |
|
| SAF-00128 | SA Anterior Deflection Bumper, Soft (blue) |
| SAF-00132 | SA Anterior Deflection Bumper, Medium (black) |
| SAF-00134 | SA Anterior Deflection Bumper, Firm (white) |
| SAF-00140 | SA Posterior Deflection Bumper, Soft (yellow) |
| SAF-00142 | SA Posterior Deflection Bumper, Medium (green) |
| SAF-00144 | SA Posterior Deflection Bumper, Firm (red) |
| SAF-00130 | Set of 6 – SA Anterior & Posterior Deflection Bumpers |
| Endoskeletal Ankle | |
| SAF-00100 | Endoskeletal SA Ankle |
| Replacement Parts | |
| SAF-00120 | SA Ankle Joint Bushing, pair |
| SAF-00121 | SA Ankle Pin Retaining Screw |
| SAF-00122 | SA Ankle Pin Snap Ring (2) |
| SAF-00125 | SA Ankle Pin |
| SAF-00126 | SA Pin Hole Plug, pair |